Computing LOS for Large Areas
Computing LOS for Large Areas - Gordon Lipford gclipford@sympatico.ca
Summary and Genesis
In most roguelike games, there is a need to calculate which dungeon grids are visible in a direct line of sight to the player. Closely tied to this is a need to calculate whether or not a dungeon grid is 'lit' by a player light source of potentially variable radius.
Using ray-tracing to calculate LOS is a well known and excellent method to address both these needs, if the radius involved is reasonably small. The problem with ray-traced LOS algorithms lies only with their memory consumption, which increases as O(radius^3). As per most LOS algorithms, every cell within the radius of computation must be visited at least once; ray-traced LOS visits each cell only once and so takes O(radius^2) to complete.
Using shadow casting, one may reduce the memory consumption to O(radius), while keeping computation time O(radius^2) - though probably still slower than ray-tracing.
Two other features of shadow casting that may prove useful:
- radius may be changed dynamically; very little recomputation necessary.
- shadows may be 'relaxed' such that a blocker takes up less than the entire cell - normal calculations assume that a blocker takes up the entire (square) cell. This involves very little modification of the algorithm itself, and in fact may be parameterized such that it can be changed dynamically.
General Method
This algorithm is given for a single octant (45 degrees of a circle, or one eighth of a square). It is left as an exercise for the reader to translate the algorithm to other octants; however, four arrays and some pseudo-code are given in Octet Translation.
The player is treated as a geometric point in the center of cell (0,0). Each grid cell (defined below) may contain something which blocks the player's line of sight.
Given a LOS radius of N, we traverse the octant from (0,0) to (N,N) one column at a time, from cell (0,y) to (y,y) within the column. We examine each cell to see if it is blocked. If so, we perform two calculations:
- Find the inverse slope of a line from the center of (0,0) to the upper left corner of the cell, and
- Find the inverse slope of a line from the center of (0,0) to the lower right corner of the same cell.
____________
| |
| |
| (2,2) |
| U. |
___________|_UU_______|
| UUU#########|
| UU |##########|
| UUU |# (2,1) ##|
| UU |##########|
___________|UU________|##########|LLLL..
| UUU | LLLLLLLLL
| UU | LLLLLLLLLL |
| (0UULLLLLLLL(1,0) | (2,0) |
| | | |
|__________|__________|__________|
In this example, (2,1) is blocked. The line corresponding to the upper bound of the shadow cast by the blocker at (2,1) has a slope of 1.5 / 1.5 = 1.0. The inverse of this slope is also 1.0. Similarly for the lower bound, slope is 0.5 / 2.5 = 0.2. The inverse slope of 0.2 is 5.0.
Note that any grid blocker in cell 0 will generate a _negative_ lower slope. When this happens, assign some arbitrarily large value.
The result of #1 is assigned to the 'upper shadow max', and the result of #2 is assigned to the 'lower shadow max' (see below).
The algorithm then uses these values to determine whether or not other cells farther out than the blocker are in it's shadow or not. In this example, the shadow will 'grow' upwards at a rate of 1 grid every 1.0 steps (i.e. every step), and the lower bound of the shadow will 'decay', exposing the cell(s) to light, at the rate of 1 grid every 5.0 steps.
Note that the use of floating point arithmetic is NOT necessary for this algorithm. All formulas are presented using floating point in order not to confuse the algorithm with its implementation.
Also note that the 'relaxing' of the algorithm can be done at precisely this point by assuming the blocking cell to occupy less than the full grid square.
Algorithm Terms
Within the algorithm, a Cell is a working representation of a grid square. Each cell has several properties:
- upper shadow count (numeric)
- upper shadow maximum (numeric)
- lower shadow count (numeric)
- lower shadow maximum (numeric)
- visible (boolean)
- lit (boolean)
- lit_delay (boolean)
The first four of these will be referred to in the specific algorithm as Cell[n].upper_max, Cell[n].up_count, Cell[n].low_max, and Cell[n].low_count.
To 'initialize' a Cell, set all integer values to 0, and all Boolean values to 'true' except for lit_delay.
A Cell has 'reached' it's upper maximum if the upper maximum is non-zero, count+0.5 is >= the maximum, and count-0.5 <= the maximum.
Similarly for a Cell 'reaching' it's lower maximum.
Specific Algorithm
allocate an array of Cells. The array is one dimensional and
indexed from 0 to N (so it has a size of N+1). No cell initialization
is necessary at this time; it occurs within the inner loop in very
specific places. There is no need to re-initialize anything between
octant calculations.
begin function los_octant:
boolean variable VISIBLE_CORNER
// this is necessary for aesthetic reasons. Without this variable
// and associated hack, a dead-end will appear as follows:
// ######
// .@....#
// ######
// Although this is geometrically correct (at least if the blockers
// occupy the entire grid cell), it is more pleasing to see this:
// #######
// .@....#
// #######
boolean variable BLOCKER
// convenience: does the current cell represent a grid square that
// blocks LOS?
numeric UP_INC
numeric LOW_INC
numeric SOUTH
// always CELL-1. Convenience.
// Cell (0,0) is assumed to be lit and visible in all cases.
initialize Cell[0]
VISIBLE_CORNER = false
// now for the main double loop:
for each COLUMN in (1.. N)
for each CELL in (0.. COLUMN)
assign TRUE to BLOCKER iff the object at grid (COLUMN, CELL) will
block the players LOS
UP_INC = 1
LOW_INC = 1
SOUTH = CELL - 1
// STEP 1 - inherit values from immediately preceding column
// light up from lit_delay if appropriate
// 'steal' lower bound shadow from 'south' cell if
// if it lit
if CELL < COLUMN
if Cell[CELL].lit_delay
if not BLOCKER
if Cell[SOUTH].lit
if Cell[SOUTH].low_max <> 0
Cell[CELL].lit = false
Cell[CELL].low_max = Cell[SOUTH].low_max
Cell[CELL].low_count = Cell[SOUTH].low_count
Cell[SOUTH].low_max = 0
Cell[SOUTH].low_count = 0
LOW_INC = 0
else
Cell[CELL].lit = true
endif
endif
endif
Cell[CELL].lit_delay = false
endif
else
initialize Cell[CELL]
endif
// STEP 2 - check for blocker
// a dark blocker in a shadows edge will be visible
// (but still dark)
if BLOCKER
if Cell[CELL].lit OR (CELL > 0 AND Cell[SOUTH].lit) OR VIS_CORNER
VIS_CORNER = Cell[CELL].lit
Cell[CELL].lit = false // blockers are always dark
Cell[CELL].visible = true // but always visible if we get here..
calculate temporary UPPER and LOWER values for this grid position
if UPPER < Cell[CELL].up_max OR Cell[CELL].up_max == 0
// new upper shadow
Cell[CELL].up_max = UPPER
Cell[CELL].up_count = 0;
UP_INC = 0
endif
if LOWER > Cell[CELL].low_max OR Cell[CELL].lower == 0
// new lower shadow
Cell[CELL].low_max = LOWER
Cell[CELL].low_count = -1
LOW_INC = 0
if LOWER <= 3 // somewhat arbitrary, but looks right
Cell[CELL].lit_delay = true
endif
endif
else
Cell[CELL].visible = false
endif
else
Cell[CELL].visible = false
endif
// STEP 3 - add increments to upper and lower counts
add UP_INC to Cell[CELL].up_count
add LOW_INC to Cell[CELL].low_count
// STEP 4 - look south to see if we've been overtaken by shadow
if CELL > 0
if Cell[SOUTH] has 'reached' upper maximum
if Cell[CELL] has NOT 'reached' upper maximum
Cell[CELL].up_max = Cell[SOUTH].up_max
Cell[CELL].up_count = Cell[SOUTH].up_count
subtract Cell[SOUTH].up_max from Cell[CELL].up_count
endif
Cell[CELL].lit = false
Cell[CELL].visible = false
endif
// STEP 5 - erase current lower shadow if one is active in the
// cell to our south
if Cell[SOUTH] has 'reached' lower maximum
Cell[CELL].low_max = Cell[SOUTH].low_max
Cell[CELL].low_count = Cell[SOUTH].low_count
subtract Cell[SOUTH].low_max from Cell[CELL].low_count
set both Cell[SOUTH].low_max and Cell[SOUTH].low_count to 0
endif
if Cell[SOUTH].low_max <> 0 OR (Cell[SOUTH].low_max == 0 AND NOT Cell[SOUTH].lit)
Cell[CELL].low_count = Cell[CELL].low_max + 10
endif
endif
// STEP 6 - light up if we've reached lower max (ie come out of shadow)
if Cell[CELL] has 'reached' lower maximum
Cell[CELL].lit = true
endif
// STEP 7 - apply 'lit' value
This step in the algorithm is entirely dependent on how the map grid
is implemented. The basic criterion for a lit square is as follows:
if Cell[CELL].lit OR (BLOCKER AND Cell[CELL].vislble)
// do something appropriate
else
// the cell is not visible by the player.
endif
end for : CELL
end for : COLUMN
end function : los_octant
Possible Refinements
If an entire column is dark (ie Cell[CELL].lit is FALSE for each cell in the column), there is no need to continue calculations - every subsequent column will be dark and NOT visible.
It may be possible to reconstruct certain parts of this algorithm so that needless computation is avoided. This is left as an exercise in order to make the basic algorithm as readable as possible.
At no point does the algorithm assume sequential evaluation of expression terms. It may be possible to rewrite certain tests to take advantage of this compiler feature.
The above algorithm processes a square area, but can be trivially modified to process any other area possessing eightfold symmetry.
Octant Translation
Any cell with coordinates (X,Y) may be translated to another octant with the following transformation (given in C-like code):
int xxcomp[8] = { 1, 0, 0, -1, -1, 0, 0, 1 }
int xycomp[8] = { 0, 1, -1, 0, 0, -1, 1, 0 }
int yxcomp[8] = { 0, 1, 1, 0, 0, -1, -1, 0 }
int yycomp[8] = { 1, 0, 0, 1, -1, 0, 0, -1 }
tx = X * xxcomp[o] + Y * xycomp[o]
ty = X * yxcomp[o] + Y * yycomp[o]
Where o is the octant number, ranging from 0 to 7.
The Author
I (Gordon Lipford) am a happily employed father of 2 boisterous boys who enjoys designing and coding games as a hobby. I am drawn to Roguelikes and their abstract representation of a game world - allowing my imagination free reign to visualize the environment.
Please send all correspondence to gclipford@sympatico.ca. If that fails, you may try my work address: lipford@ca.ibm.com.